Search results for " Mechanical properties"
showing 10 items of 72 documents
The impact of ocean acidification and warming on the skeletal mechanical properties of the sea urchin Paracentrotus lividus from laboratory and field…
2015
AbstractIncreased atmospheric CO2 concentration is leading to changes in the carbonate chemistry and the temperature of the ocean. The impact of these processes on marine organisms will depend on their ability to cope with those changes, particularly the maintenance of calcium carbonate structures. Both a laboratory experiment (long-term exposure to decreased pH and increased temperature) and collections of individuals from natural environments characterized by low pH levels (individuals from intertidal pools and around a CO2 seep) were here coupled to comprehensively study the impact of near-future conditions of pH and temperature on the mechanical properties of the skeleton of the euechin…
Microstructural, mechanical and energy demand characterization of alternative WAAM techniques for Al-alloy parts production
2020
Abstract Additive manufacturing (AM) processes are gathering momentum as an alternative to conventional manufacturing processes. A research effort is being made worldwide to identify the most promising AM approaches. Within this category, wire arc additive manufacturing (WAAM) is among the most interesting, especially when large parts must be manufactured. In this paper, two different WAAM deposition techniques suitable for the deposition of Aluminum alloys, Cold Metal Transfer (CMT) and CMT mix drive, are analyzed and compared. With the aim of obtaining a clear picture concerning the two different techniques, microstructural analyses, mechanical property evaluation and electrical energy de…
Green Composites Based on PLA and Agricultural or Marine Waste Prepared by FDM
2021
Three dimensional-printability of green composites is recently growing in importance and interest, especially in the view of feasibility to valorize agricultural and marine waste to attain green fillers capable of reducing bioplastic costs, without compromising their processability and performance from an environmental and mechanical standpoint. In this work, two lignocellulosic fillers, obtained from Opuntia ficus indica and Posidonia oceanica, were added to PLA and processed by FDM. Among the 3D printed biocomposites investigated, slight differences could be found in terms of PLA molecular weight and filler aspect ratio. It was shown that it is possible to replace up to 20% of bioplastic …
Green composites based on biodegradable polymers and anchovy (Engraulis Encrasicolus) waste suitable for 3D printing applications
2022
Every day large amounts of fish waste are produced and grossly discarded in markets around the world causing environmental and hygiene issue. The use of these scraps for the production of materials with higher added value can definitely contributed to solve this problem. In this work, 10% and 20% of anchovy fishbone powder (EE), obtained by market waste, were microbiological and mechanical tested and subsequently added to polylactic acid (PLA) and to a commercial blend of biodegradable co-polyesters (Mater-Bi®). Rheological characterization suggests the potential printability of all prepared composites filaments. 10% EE filled composites showed outstanding printability. Morphological analys…
Effect of filler on the creep characteristics of epoxy and epoxy-based CFRPs containing multi-walled carbon nanotubes
2014
The aim of this work was to determine the effect of carbon nanotubes (CNTs) on the elastic and viscoelastic properties of an epoxy resin used in carbon fiber-reinforced plastics (CFRPs) in the matrix-dominated flexural testing mode. Neat and CNTs-containing (1. wt.%) epoxy resin and CFRP specimens were prepared and investigated. Three-point bending tests were carried out on nanocomposite (NC) and CFRP specimens at room temperature in quasi-static and cyclic creep regimes. The main effect of CNTs was observed in the reduction of creep compliance of epoxy (40%) and CFRP (30%), especially at higher stresses. The reduction of creep characteristics especially on viscoelastic and plastic strains …
The Effects of Nanoclay on the Mechanical Properties, Carvacrol Release and Degradation of a PLA/PBAT Blend
2020
The formulation of polymeric films endowed with the abilities of controlled release of antimicrobials and biodegradability is the latest trend of food packaging. Biodegradable polymer (Bio-Flex®
Efficacy of poly(lactic acid)/carvacrol electrospun membranes against Staphylococcus aureus and Candida albicans in single and mixed cultures
2018
Carvacrol (CAR) is one of the most promising essential oil components with antimicrobial activity. New technologies aimed to incorporate this active molecule into carrier matrix to improve the stability and prolong the biological activity. The goal of this study was to investigate the feasibility of incorporating CAR into electrospun membranes of poly(lactic acid) (PLA) for potential applications as active antimicrobial system. To this end, PLA membranes containing homogeneously dispersed CAR were successfully prepared and a series of systematic tests including morpho-mechanical properties, in vitro release rate, and antimicrobial/antibiofilm activities against Staphylococcus aureus and Can…
Study on carvacrol and cinnamaldehyde polymeric films: mechanical properties, release kinetics and antibacterial and antibiofilm activities.
2012
Polyethylene-co-vinylacetate (EVA) films with different concentrations (3.5 wt% and 7 wt%) of essential oil constituents, carvacrol or cinnamaldehyde, were prepared and characterized by mechanical, antibacterial and antibiofilm properties. The incorporation of the compounds into copolymer films affected their elastic modulus, tensile stress and elongation at break. Carvacrol and cinnamaldehyde act as plasticizers which reduce the intermolecular forces of polymer chains, thus improving the flexibility and extensibility of the film. The analysis of the surface characteristics demonstrated that essential oil constituents lowered the contact angle values without causing any remarkable variation…
Effect of Sheep Wool Fibers on Thermal Insulation and Mechanical Properties of Cement-Based Composites
2019
The use of sheep wool as a filler of cement in order to produce mortar or plaster involves several advantages for environment and energy. Moreover, it is considered as a waste and, therefore, its use is characterized by low cost. The aim of this paper is to evaluate the influence of wool fibers on thermal conductivity and mechanical properties of cement. The samples were prepared using wool fibers, obtained from a breed of Sicilian sheep, with three different lengths (i.e., 1, 6, and 20 mm). Furthermore, in order to evaluate the influence of fiber content, the samples were prepared by varying the fiber weight fraction. The thermal conductivity of the samples was analyzed by using a heat flo…
Assessment of Postharvest Dehydration Kinetics and Skin Mechanical Properties of “Muscat of Alexandria” Grapes by Response Surface Methodology
2016
The dipping of berries in a dilute solution of sodium hydroxide during a short time was evaluated as pretreatment undertaken prior to convective dehydration of wine grapes. The impact of the sodium hydroxide content and dipping time on weight loss (WL) at different dehydration times was thoroughly assessed using central composite design (CCD) and response surface methodology (RSM). Furthermore, the effects of these two variables were also investigated on the skin mechanical properties of dehydrated grapes. The effect of these two pretreatment factors on the dehydration kinetics and skin hardness was satisfactorily fitted to regression models. The berry pretreatment with low sodium hydroxide…